Skip to content
navigationLanguage

Cinematic pre-wedding film editing: the pipeline from selection to delivery

Every stage is described through a decision rather than a promise: what we cut out, how we build the rhythm, what we check before delivery.

Cinematic pre-wedding film editing is decided by the order of work, not by the camera: the footage becomes a story only in the edit. Below is our full working pipeline — selecting and cleaning the raw files, assembling to the music, colour and sound, checking and delivering the versions.

Selecting and cleaning the material

The material arrives in a mixed state: the main camera, the second camera, sound from the lavalier mics, sound from the camera microphone, separate audio tracks. The first thing we do is not watch everything in a row, but put it in its place: a copy on the working disk with a checksum check, a backup, an import into DaVinci Resolve, and bins by location and by shot type.
  • A backup before the import: a lost raw file cannot be brought back by shooting it again.
  • Bins by location and shot type: details, portraits, the group, movement.
  • Selection marks: green — in the edit, yellow — in question, red — not used.
  • Sound sync by the camera timecode and the marker — before starting the clean-up.
  • Proxies for the edit: heavy files must not make the timeline stutter.
Material without sound is a separate conversation. A clip whose microphone track was not saved cannot be rescued in the edit: sound is recorded at the shoot, and there is no way to get it back afterwards.
Cutting is the most underestimated part of the work. Only a minority of what was shot goes into the film: misses, duplicates, random conversations, shots where the light has already gone. We cut them not by the timer but by meaning: if a shot does not move the story forward and does not bring the couple closer, it is not needed.

Assembly and rhythm

We choose the music first: it sets the tempo and the structure, and the footage is picked to fit it. The order is simple: sync assembly, rough cut, then the final cut to the music, and only after that the work on the silence between the fragments.
  • The music comes first: the length of the track sets the grid of the assembly.
  • Narrative arc: opening, introduction of the couple, activity, transition, peak, finale.
  • Cuts on the music, not only on the meaning: an edit to the beat reads faster.
  • We do not cut dialogue too tight: J and L cuts leave the voice some air.
For the same reason we do not cut strong moments out of the film just because they do not land on the beat of the track. Inside a highlight reel the time obeys the tempo; in the full film it is the other way round — the tempo adapts to the story.
We do not show the rough cut in full right away. First the frame: the order of the blocks and the running time; then the filling. That way the couple sees a structure rather than “even more video”, and the changes go to the substance rather than to the mood.

Colour and sound

We do not colour clip by clip but by location: all the shots of one location are graded together, otherwise the picture jumps at the joins. Our colour grading pipeline has 6 nodes: CST, balance, creative look, skin protection, location corrections and grain.
  • CST brings the source to a common system, and then every node solves one task.
  • Skin protection as a separate node: a wedding shot is almost always taken in warm light.
  • Grain at the end: it has to match across all the shots, otherwise the cut is visible.
Sound is assembled in layers: music, ambience, Foley, dialogue and transitions. We keep the music layer at minus 14 LUFS — the reference that YouTube normalisation brings the track to. We measure per the ITU-R BS.1770 recommendation: it describes both the loudness measurement and the true-peak measurement.
  • Dialogue is the base: we clean it in iZotope RX, and only then build the mix.
  • Music does not compete with the voice: the level is decided by ear, not by eye.
  • The final check of the mix runs on three sources: studio monitors, headphones, a phone.
  • Speech from the microphone matters more than the picture: the viewer forgives a soft shot but not an unintelligible voice.
The sound layers are not equal. Dialogue sets the fact, Foley gives the space, ambience is the air between the lines, music is the emotion. Mixing them into one common background does not work: the voice stops being audible and the film starts to sound like an advertisement over the picture.

Delivery and versions

Delivery is not one file. We hand over the archival master in ProRes 422 HQ, a light version for platforms and social media in H.264, and a version for publication on YouTube in H.265. The publication settings come from YouTube's recommendations: the MP4 container, the AAC-LC audio codec, a sampling rate of 48 kHz, progressive scan and variable bitrate.
Before delivery every file goes through a checklist: resolution, codec, colour space, loudness, true peak. The list is the same for all versions — a mismatch between the master and the publication copy is caught at delivery, not on the couple's phone screen.

Why the edit is worth its money

Our sound design cost page describes a typical budget split: 70-80 % goes to production and 20-30 % to post-production. Editing, colour and sound usually stay at the very end of that list — and they are the first to go from the estimate when the budget starts to press.
What exactly the couple buys with that money: the order of the scenes, sound that can be heard, colour in which the misses are not visible, and versions for every platform. Each item is separate work with its own check, so “cut together what was shot” and “make a film” cost different amounts. The difference is visible not in the estimate but in the film.
About the result separately: the couple gets not one file but three working versions, checked sound, colour that will not have to be redone, and a clear structure — what to show the guests, what to keep in the family archive and what to post online. If the edit comes down to “we glued it and handed it over”, half of that work has not been done.
About the figures separately: we do not publish the timing of each stage or the cost of our edit until we have our own measurement protocol with that data. Naming an exact figure without a document means passing a guess off as a fact, and in an estimate such a mistake costs more than leaving it out.

Pre-wedding film editing — frequently asked questions

How long does the film take?
The timing depends on the amount of raw material, not on the running time of the film: a short video assembled from a large array of shots takes longer. We will publish the exact timings per stage together with our own measurement protocol, and until then we give a general rule: the more hours of footage there are, the longer the rough cut takes, and the only way to speed it up is to agree in advance what matters more.
Can you edit from home footage?
Yes, we make films from any camera. Home footage gives an honest but more modest picture: the light, the sound and the stability decide, not the camera brand. Music rights, the sound check and the delivery versions stay the same as for a shoot on professional equipment.

Related reading

Need this done as a project?

We take on projects like this — with the same settings we walk through in this piece.