Three point lighting for interviews: the setup on location and in the office
The setup on location and in the office: angles, a reflector instead of the second light, the window and matching the colour temperature to the camera presets.
Three point lighting for interviews is built from three sources: key, fill and back light. Below is the setup itself, the equipment list, and the answer to what replaces the second light if you shoot in an ordinary room.
The three point setup
A setup of three sources rests on a single logic: the key draws the shape of the face, the fill lifts the shadow it casts, the back light separates the person from the background. The key is placed in front of the subject, slightly above eye level, at an angle of 45° to the camera axis — that is where the volume of the face comes from, along with a small shadow under the nose. The fill is turned to the opposite side at the same angle of 45°, but is made weaker: it has to lift the shadow, not erase it. The back light is hidden behind the subject and higher — it outlines the silhouette.
The roles of the sources
- Key — in front of the subject, slightly above eye level, at an angle of 45° to the camera axis; the brightest of the three.
- Fill — on the opposite side at an angle of 45°, weaker than the key.
- Back light — behind the subject and higher, it separates the silhouette from the background.
- Background light — a separate fixture or a household lamp, it works on the background and not on the subject.
A compact bicolour fixture that is easy to carry around is the Aputure Light Storm LS 60x: it runs on a D-Tap battery or on mains, narrows the beam angle and switches the colour temperature. Its specifications:
| Parameter | Value |
|---|---|
| Type of light | bicolour LED with an adjustable beam angle, powered by a D-Tap battery or mains |
| Output power | 60W |
| Colour temperature range | 2700K–6500K |
| Colour temperature presets | 2700K, 3200K, 4300K, 5500K, 6500K |
| Colour rendering indices | CRI 96 and above, TLCI 98 and above |
| Beam angle range | from 15° to 45° |
| Illuminance in spot at 5600K | 30 000+ lux |
| Illuminance in flood mode at 5600K | 5 200+ lux |
| Price | 419 dollars |
How to get by with one source
One fixture is enough if you do not shoot in an empty studio space. The key is placed as usual, and the fill is replaced by a reflector or white card: it bounces the light into the shadow, and the face stops looking flat. A simple rule works here — the angle of incidence equals the angle of reflection, so the card is held so that the reflected light lands exactly in the shadow on the face.
The second technique is diffusion. A softbox, an umbrella or simply a white sheet in front of the lamp gives softer shadow transitions than a hard point source, and the face reads more calmly. The same technique works with a window as well: a large window is already a soft source and not a spotlight.
The window as a light source
If there is a window nearby, a fixture for the key light may not be needed at all. Indoors the subject is placed by a large window, outdoors in a shaded place. The window gives a soft directional flow, and the same techniques work with it as with a studio fixture.
What to do with the window
- Subject by the window, reflector opposite — the half tone goes away, the face is lit from both sides.
- Outdoors — in the shade of a building or a tree: in direct sunlight the interviewee squints.
- Then work by the general setup: key — the window, fill — the reflector, back light — a small fixture behind.
Background and back light
The back light is responsible for separating the silhouette: without it the person merges with the background even if the face is lit correctly. It is placed behind the subject and higher — that is where the hair and the shoulders get a light rim.
The background is lit separately: with a separate fixture or a household lamp pointed at the background and not at the person. Then it is visible what stands behind the interviewee, and that background does not depend on the main source.
Frequently asked questions about lighting
Do you need a softbox
No, if diffusion is enough: a softbox, an umbrella or a white sheet in front of the lamp gives softer shadow transitions, and a reflector with white card replaces the fill source. A full setup of three sources is needed where the frame has a background and a second plane; in an ordinary room a window, a reflector and one fixture are enough.
What colour temperature
The fixture is chosen by its range: the Aputure Light Storm LS 60x covers 2700K to 6500K, with presets at 2700K, 3200K, 4300K, 5500K and 6500K. The Blackmagic URSA Broadcast G2 has its own white balance presets — 5600K, 3200K, 4000K, 4500K and 6500K — and an adjustment in steps of 50K. The idea is simple: the source and the camera preset have to match in colour, otherwise a white object drifts towards yellow or towards blue. For example, with tungsten lamps the 3200K preset adds a blue cast to the frame, and white stays white.
How to remove the shine on the forehead
The shine is a specular reflection: light bounces off the skin at the same angle at which it falls, and if the lens stands in the way of the reflection, a bright spot appears on the forehead and the nose. What to do: move the source in height or to the side so that the reflection leaves the face, and replace the hard fixture with a large soft one — a soft source gives a softer highlight.
Read also
Need this done as a project?
We take on projects like this — with the same settings we walk through in this piece.